Address：No. 4-4 East West Road, Jinhu County Industrial Concentration Zone, Huaian City, Jiangsu Province
Tel：0517-86918678
Fax：0517-86918679
Email：zhongweick@https://themugshotcompany.com
Post Encoding：211600
The electric actuator is an instrument of automatic selection control unit, which is combined into a…
Description：
A brief introduction: DKZ/J seriesElectric actuatorNot only can control unit and type III supporting the use of instrumentation, S control unit and the newly developed but also for supporting, makes the control system more stable and reliable, better performance, more function.DKZ is a series of straight travel electric actuator, DKJ rotary series electric actuator.The new technology of series electric actuator using "S" type of electric actuator, integrated servo amplifier and R/I position transmitter.The electric actuator in precision, reliability, load capacity, signal quality coefficient of performance than the original products have been greatly improved. Two, widely used: DKZ/J seriesElectric actuatorAutomatic control unit selection instrument, combined into a system control unit.Equipped with SFD electric servo manipulator to realize manual control and remote manual / automatic bidirectional switch without disturbance.This series of electric actuator automatic control system is widely used in power plants, steel plants, chemical industry, light industry and other industrial sectors of the production process. Product features three, electric actuator: 1, R/I position transmitter with high reliability of the conductive plastic potentiometer with 1/250 resolution. 2, the integrated circuit technology, low power consumption, low temperature, with constant current output is stable and reliable. 3, can take the limit control design in the specified range. 4, with a simple potentiometer to adjust the zero point and stroke. 5, position feedback is the use of electric elements by screening, and assembled by high temperature and low temperature tests.Ensure actuator high requirements of reliability, MTBF MBTF>25000 hours. Four,Electric actuatorThe technical parameters: 1, input signal: 4 ~ 20mA; 1 ~ 5V; 2, load impedance: 250 ohms; 3, the power supply voltage: 220V phase: 50Hz; three: 380V 50Hz; 4, the basic error: + 2.59, 6; 5, the ambient temperature: servo amplifier: O to 50 DEG C; actuator: -25 to 70 DEG c; 6, environmental humidity: manipulator, servo amplifier: 10% ~ 85%: 5% ~ 95%; actuator. Five, specifications: DKZ series straight trip:
Serial number
Model
The nominal load value N
The nominal value of travel mm
One
DKZ-1000
Four hundred
6, 10, 16
Two
DKZ-2100
One thousand
10, 16, 25
Three
DKZ-3100
Two thousand and five hundred
10, 16, 25
Four
DKZ-4300
Six thousand
25, 40, 60
Five
DKZ-5400
Sixteen thousand
40, 60, 100
Six
DKZ-6400
Twenty-five thousand
40, 60, 100
DKJ series rotary:
Serial number
Model
The nominal load value N-m
The nominal value of travel
One
SDJ-0100
Sixteen
90 degrees
Two
SDJ-1100
Forty
Three
SDJ-2100
One hundred
Four
SDJ-3100
Two hundred and fifty
Five
SDJ_4100
Six hundred
Six
SDJ-5100
One thousand and six hundred
Seven
SDJ-6100
Four thousand
Eight
SDJ-7100
Six thousand
Nine
SDJ-8100
Ten thousand
DKD series of multi turn:
Serial number
Model
The nominal load value N.m
The nominal value of R / min trip
One
DKD-0100
Sixteen
5, 7, 10, 15, 20
Two
DKD-1100
Forty
Three
DKD-2100
One hundred
Four
DKD-3100
Two hundred and fifty
5, 7, 10, 15
Five
DKD-4100
Six hundred
5, 7
The design and selection of ordering instructions: 1, the product name and model of the products of the nominal diameter of pressure material by the use of the medium temperature and products with the attachment so that we provide you the correct selection. 2, if you have special request, please specify when ordering products in. 3, if the unit has been selected by the design model, please press the model directly to our sales department order. 4, the occasion is very important when using more complex or the environment when you try to provide design drawings.
